HP Insight Control - Manual (Page 6)

Connecting server blades
1. Connect the enclosure to the network that contains your Deployment Server, and power up
the enclosure.
2. Change the default rack and enclosure names.
3. Insert the server blades into the enclosure and wait for the blades to power up.
4. From the Computer pane, right-click on a server blade and select Power Control
→iLO –
Interface.
The iLO homepage appears.
Deploying the first server blade
1. In the Jobs pane, select a Windows scripted install job. Drag the job to the server blade in
the Computers pane.
2. Select Run this job immediately, and then click OK.
3. To view the progress of the job, double-click the computer in the job’s computer history.
Reconfiguring the server blade
By default the Windows scripted install job configures the computer name as the console display
name and configures the network as DHCP.
If you need to reconfigure the server:
1.
In the Computers pane, right-click the blade and click Configure.
2. Click Microsoft Networking, and then enter a new computer name and a new workgroup or
domain name.
3. Click TCP/IP, and then enter the appropriate IP information.
6 Getting started