HP 3PAR Solutions Software for vSphere - Manual (Page 13)

NOTE: Consult the HP 3PAR Configuration Matrix for details on what specific
XCOPY/ATX/WRITE_SAME primitives are supported on a given InForm OS. To obtain a copy of
this documentation, go to
http://www.hp.com/go/3par/ , navigate to your product page, click
Support for your product, and then click Manuals.
MESSAGE
3parvaai:ERR tpd_claim_device(Out of memory claiming device %s)
DESCRIPTION
An out of memory error has occurred while HP 3PAR VAAI Plug-in 2.2.0 Software for VMware
vSphere 5.0 was performing a claim device function.
SUGGESTED ACTION
Check your hardware memory resource setting.
MESSAGE
3parvaai:ERR tpd_claim_device(Inquiry to device %s failed)
DESCRIPTION
Indicates that a SCSI Inquiry device command error has occurred. The device might not be ready
or is not reachable.
SUGGESTED ACTION
Check the connection between the host and HP 3PAR Storage System. You can also consult the
HP 3PAR Storage System log file for additional details that might be useful in solving the problem.
MESSAGE
3parvaai:ERR init_module(Failed to register vaaip plugin: %s)
DESCRIPTION
Failed to register HP 3PAR VAAI Plug-in 2.2.0 Software for VMware vSphere 5.0 with the VMware
kernel during loading of the plug-in.
SUGGESTED ACTION
Remove the HP 3PAR VAAI plug-in module, reboot the ESXi host, and re-install the HP 3PAR VAAI
Plug-in 2.2.0 Software for VMware vSphere 5.0 package.
MESSAGE
3parvaai:ERR Failed to unregister the plugin. The module will be unloaded
anyway.
DESCRIPTION
Indicates that the HP 3PAR VAAI plug-in module was not properly unregistered as part of the
cleanup process that occurs when the HP 3PAR VAAI Plug-in is unloaded from the ESXi kernel.
Even though the HP 3PAR VAAI plug-in module was not unregistered from VMware kernel, the
module had been unloaded from the kernel. After unloading the module, the ESXi host needs to
be rebooted.
SUGGESTED ACTION
None.
Run Time Error Messages 13