HP Scanjet N6310 Document Flatbed Scanner - Manual (Page 9)

To change energy consumption settings, follow these steps:
1. Press the Setup ( ) button, use
and until the energy consumption setting
you want is selected, and then press OK.
2. Use
and until the setting you want (ON or OFF) is selected, press OK, and
then press twice.
NOTE: Setting Energy Savings to ON reduces power to all parts of the scanner,
including the scanner lamp. As a result, setting Instant Warm-up to OFF when
Energy Savings is set to ON has no effect.
Tools
This menu option starts the HP Scanner Tools Utility on the connected computer. This
utility allows you to associate any button-aware application with the Scan (
) or
Copy ( ) buttons and to monitor usage of certain scanner parts for maintenance
purposes.
NOTE: You can also start the HP Scanner Tools Utility through the Windows
taskbar. To do so, click Start, point to Programs or All Programs, point to HP, point
to Scanjet, point to HP Scanjet N6310, and then click Scanner Tools Utility.
See also
•
“Control of the scanner buttons” on page 42
• “HP Scanner Tools Utility scanner maintenance information” on page 24
Load originals
You can load your originals into your scanner using one of the following methods:
• Use the automatic document feeder (ADF)
• Use the scanner glass
• Use the transparent materials adapter (TMA)
Use the automatic document feeder (ADF)
For helpful information on loading your documents properly, refer to the following topics.
• Document loading tips
• How to load documents
Document loading tips
•
The automatic document feeder (ADF) supports the following paper types.
Width: 148-216 mm (5.8-8.5 in)
Length: 148-356 mm (5.8-14 in)
Weight: 50-120 g/m 2 (13-32 lb)
Load originals 7