HP Scanjet N6310 Document Flatbed Scanner - Manual (Page 15)

c. If the negative strip has fewer than three frames, insert the negatives light-shield
into the negative strip holder, making sure the edge of the light-shield touches the
last frame.
d. Insert the negative strip holder back into the slide holder.
4. Close the scanner lid.
See also
•
“Start a scan” on page 13
• “Slides, negatives, and TMA issues” on page 40
Tips for scanning transparent items
•
To scan transparent items larger than those that the transparent materials adapter
(TMA) accepts, place the transparency on the scanner glass, place a white sheet of
paper on top of the transparency, and then scan.
• When scanning a negative, the default scan shortcut automatically enlarges the
image to approximately 6.7 x 10 cm (2.64 x 4 in). If you want the final image to be
larger or smaller, start the scan with the HP scanning software and then use the
Resize tool in the HP Scanning preview window to set the scaling to the final size
that you want. The scanner will scan the item to the size that you select and adjust
the scan resolution as appropriate. For more information, see the scanner software
help.
Start a scan
Start scanning in one of these ways:
• Use the Scan button
• Use the HP scanning software
• Use other software programs
Use the Scan button
To scan using the Scan ( ) button on the scanner, follow these steps:
1. Load the originals.
2. If the scanner LCD indicates there are no scan shortcuts on the scanner, press the
Scan ( ) button. The Scan To...Setup dialog box displays on the computer screen,
allowing you to transfer the scan shortcuts you want to use to the scanner control
panel scan shortcuts list.
a. In the Available Scan Shortcuts list, select a shortcut, and then click Add.
b. Use the Move (up) and Move (down) arrows in the dialog box to arrange the
shortcut sequence in the Front Panel List.
The shortcuts will appear in this order as you scroll through the list on the front
panel of your scanning device.
c. When the list is complete, click Update the Device. For more information about
uploading scan shortcuts, see the printed Getting Started Guide.
3. Use
and to select the scan shortcut.
4. Press the Scan ( ) button on the scanner control panel. The scanner starts the
scan and sends the scan to the location specified in the scan shortcut.
Start a scan 13