HP Integrity NonStop J-Series - Manual (Page 18)

Installing and Configuring the Tape Drive for the
NonStop NS-Series Integrity Server
5344-2SE Tape Drive Installation and User’s Guide — 546010-001
2 -6
Configuration
Configuration
1. Issue an SCF ADD TAPE command. This is an example:
-> ADD TAPE $5344, SENDTO STORAGE, CLIM C1002531, LUN 1
You can specify backup and primary CPUs if you need to balance the processing
load to other CPUs.
2. After configuring the tape drive in SCF, issue the following command:
SCF> START TAPE $tape
Example:
SCF> START TAPE $5344
For complete details about the ADD and START commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.