Axis Communications AXIS Q1755-E - Manual (Page 10)

10
AXIS Q1755/-E - Accessing the Camera
AMC Audio controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible
when audio is enabled.
Speaker buttons - Click to switch the sound on or off.
Microphone buttons - Click to switch the sound on or off.
Use the slider to control the
volume on the speaker and microphone.
Half-duplex mode
The Talk/Listen button is used to switch between sending and receiving audio. The button can be config-
ured from the Audio tab in the AMC Control panel:
•
Push-To-Talk mode: Click and hold the button to talk/send, release the button to listen.
• Toggle mode: Click once to switch between talking and listening.
Simplex – Network Camera speaker only mode
To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio
transmission.