HP EliteBook 8560w Mobile Workstation - Manual (Page 16)

5 RAID volume setup
The following instructions assume that a supported HDD is installed in the computer Upgrade Bay, in
the SATA-swappable bay of the docking station, or connected to the eSATA port of the computer
(see
Devices supported on page 7 ).
The basic RAID migration steps are as follows:
● Enable RAID through the system BIOS.
● Initiate RAID migration using Intel® Rapid Storage Technology Console.
CAUTION: Make sure that the computer is connected to AC power before initiating the following
procedures. The loss of power during RAID migration can result in the loss of data.
12 Chapter 5 RAID volume setup