beautypg.com

To obtain the date and time from an ntp server – HP 2000SA G2-Modular-Smart-Array User Manual

Page 47

background image

HP 2000sa G2 Modular Smart Array User Guide

47

To obtain the date and time from an NTP server

1.

In the Configuration View panel, right-click the system and select Configuration > System Settings >

Date, Time. The date and time options appear.

2.

Set the options:
• NTP. Select Enabled.
• NTP Time Zone Offset. Optional. If the system timestamps should use the NTP server's time zone

instead of the local time zone, enter the time zone offset.

• NTP Server Address. Optional. If the system should retrieve time values from a specific NTP server,

enter the address of an NTP server. If no IP server address is set, the system listens for time messages

sent by an NTP server in broadcast mode.

3.

Click Apply.

See also other documents in the category HP Storage: