HP 2000SA G2-Modular-Smart-Array - Manual (Page 34)

34 Connecting hosts
Blade enclosure configuration
Blade servers/two 3Gb SAS BL switches
Connecting remote management hosts
The management host directly manages systems out-of-band over an Ethernet network.
1. Connect an Ethernet cable to the network port on each controller.
2. Connect the other end of each Ethernet cable to a network that your management host can access
(preferably on the same subnet).
NOTE: Connections to this device must be made with shielded cables with metallic RFI/EMI connector
hoods in order to maintain compliance with FCC Rules and Regulations.
28
29
27
26
25
24
23
22
21
20
19
18
28
29
27
26
25
24
23
22
21
20
19
18 OK
OK
17
16
15
14
13
12
11
10
09
08
07
17
16
15
14
13
12
11
10
09
08
07