Rear panel leds, 2312sa g2 and 2324sa g2 – HP 2000SA G2-Modular-Smart-Array User Manual
Page 40
40
LED descriptions
Rear panel LEDs
2312sa G2 and 2324sa G2
LED
Description
Definition
1
Power supply LEDs
See
.
2
Host 3Gb SAS Link Status (ports 1-4) Green — The port is connected and the link is up.
Off — The port is empty or the link is down.
3
Host 3Gb SAS Link Activity
(ports 1-4)
Blinking green — Link has I/O activity.
Off — Link is idle.
4
OK to Remove
Off — The controller module is not prepared for removal.
Blue — The controller module is prepared for removal.
5
Unit Locator
Off — Normal operation.
Blinking white— Physically identifies the controller module.
6
OK
Off — Controller module is not OK.
Blinking green — System is booting.
Green — Controller module is operating normally.
7
Fault/Service Required
Amber — A fault has been detected or a service action is required.
Blinking amber — Hardware-controlled powerup or a cache flush
or restore error.
8
Network Port Link Status
Off — The Network port is not connected or the link is down.
Green — The Network link is up.
9
Network Port Activity
Off — The Ethernet link has no I/O activity.
Blinking green — The Ethernet link has I/O activity.
SAS 3
SAS 4
SAS 1
SAS 2
LINK
ACT
LINK
ACT
LINK
ACT
LINK
ACT
SAS 3
SAS 4
SAS 1
SAS 2
LINK
ACT
LINK
ACT
LINK
ACT
LINK
ACT
1
4
5 6 7
8 9
: ;
1
2
3
w