Specifications, Utp cable specifications – HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter User Manual
Page 11
Specifications 11
Specifications
HP NC382T PCI Express Dual Port Multifunction
Gigabit Server Adapter specifications
Specification Value
Network Controller Chipsets
Broadcom 5709C
Bus Type
PCI Express
Bus Width
Four lanes
Bus Speed
2.5 GHz
Data Transfer Method
Bus Master DMA
Power Requirement
Operating Voltage: +3.3V +/-5%
Power Consumption: 3.63 Watts
Maximum: 1.1A @ 3.3V (DC)
Wake on LAN Support
Enabled; Disabled; Default:Disabled
Standards Supported
IEEE802.3ab, IEEE802.3ad, IEEE802.3u, IEEE802.3x, IEEE802.3,
IEEE802.1p, IEEE802.1q
Dimensions
16.765 cm x 6.89 cm (without bracket) (6.600 x 2.713 inches (L x W))
Connector and Distances
Two RJ-45 Connectors, Cable and lengths as follows:
10BASE-T: Category 3, 4, or 5 UTP 100 Meters (328 feet)
100/1000BASE-T: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported
Automatically configured
Temperature Range
Operating: 0°C to 55°C (32°F to 131°F)
Storage: -40°C to 85°C (-40°F to 185°F)
Relative Humidity (non-condensing) Operating: 10% to 90%
Storage: 5% to 95%
Safety Compliance
UL Mark (US and Canada)
CE Mark
EN 60590
UTP cable specifications
To connect to the network, the NC382T uses the following cable for 1000Base-T transmission:
•
CAT5 UTP or better twisted-pair
•
22-26 AWG, 100Ω @ 1 MHz
•
EIA/TIA 568a or EIA/TIA 568b