HP Netserver L Server series - Manual (Page 87)

Chapter 8 Rack Mounting the HP Netserver (2-Post)
81
5. Attach the appropriate mounting brackets to the chassis, using the four screws
provided for each bracket:
a. If you are flush-mounting the HP Netserver, attach the two flush-mount
brackets, as shown in Figure 8-4.
b. If you are center-mounting the HP Netserver, attach the two
center-mount brackets, as shown in Figure 8-5.
NOTE The flush-mount brackets have pins for connecting the
front bezel; the center-mount brackets do not have pins.
Figure 8-4. Attaching Flush-Mount Brackets