HP Netserver L Server series - Manual (Page 40)

Chapter 4 Installing Additional Memory
34
0
1
2
3
DIMM
Slots
System Board (top view)
Figure 4-2. DIMM Locations on System Board
7. Spread the two retaining latches on the slot outward. See Figure 4-3.
8. Remove a DIMM from its container, handling the module by its edges.
CAUTION • Leave the memory module in the anti-static container until
you are ready to install it.
• Always use an anti-static wrist strap and a grounding mat.
• Before removing a DIMM from the anti-static container,
touch a grounded, unpainted metal surface to discharge
static electricity.