HP Netserver L Server series - Manual (Page 48)

Chapter 5 Installing Additional Boards
42
Integrated
RA Board
I C
Connector
2
Figure 5-2. Integrated RA Board Location
Installing an Accessory Board
Use this procedure to install the accessory board.
NOTE For information about a specific PCI board type, refer to the
Readme file, Tested Products List, or Configuration Advisor
on your HP Netserver Navigator CD-ROM.
1. Log off all users and, if necessary, back up files.
For detailed instructions, see "Powering Down the HP Netserver," in
Chapter 1, "Controls, Ports and Indicators."