ADC MM701F User Manual

Page 39

Chapter 3: Managing the Modem Using a Web Browser

MM701F User Manual

Configure the following parameters as supplied by your service provider:

Click

Apply

then save changes using

Parameter

Description

ADSL Standard for physical
layer interface

Select from the options:

•

ITU G.992.2 G.lite

•

ITU G.992.1 G.DMT (default)

•

ANSI T1.413 Issue 2

•

Multimode

Trellis Encoding

Enable or Disable (default) Trellis Encoding. Trellis Encoding allows
for high data speeds and reduces transmission errors.

Bin Overlap Mode

Select either FDM (default) or EchoCancellation.

Transmit Power Attenuation

Select a value from 0 to 12 decibels (0 is the default).

Coding Gain

Select either Auto (default) or a value from 0 to 7 decibels.

Maximum Bits per Bin

Select a value from 2 to 15 (14 is the default).

Transmit Start Bin

Select a value from 6 to 31 (6 is the default).

Transmit End Bin

Select a value from 6 to 31 (31 is the default).

Receive Start Bin

Select a value from 6 to 255 (32 is the default).

Receive End Bin

Select a value from 6 to 255 (255 is the default).

Maximum Downstream Rate

Select a value from 32k to 12000k (12,000 is the default).

SNR Margin Limit

Select a value from -64 to 63 (4 is the default).