HP Onboard Administrator - Manual (Page 121)

2 Absent
3a Error Management Processor An iLO failure has been
detected. Make sure you have a
suitable iLO firmware loaded.
Reseating the blade or resetting
iLO may also help.
Other iLO Network The network connectivity of iLO
is impaired. This could be due
to bad gateway, DNS or netmask
info. It could take up to 3
minutes for devices to gain
connectivity after insertion.
3b OK
4 Absent
5a OK
5b OK
6 Absent
7 Absent
8a OK
8b OK
9 Subsumed
10 OK
11a OK
11b OK
12a OK
12b OK
13 Absent
14 Absent
15 Absent
16 Absent
Interconnect Health:
Bay Status Problem Corrective Action
--- -------------------- ----------------------
--------------------------------
108 Capítulo 12 Comandos de configuración de red del chasis ESES