HP Matrix Operating Environment Software - Manual (Page 54)

Figure 35 DIO Pool tab — HPVM DIO table
You must the DIO check box in the HPVM DIO table to enable Change Label and Change Owner.
Click Change Label to change the label of the DIO. For more information, see “Changing the labels
of HPVM DIOs” (page 59) .
Click Change Owner to change the owner of the DIO to host. For more information, see “Changing
the owner of HPVM DIOs to host” (page 59) .
Column descriptions
Table 5 describes the parameters listed for host DIO resources and Table 6 describes the parameters
listed for HPVM DIO resources.
nl
Table 5 Show host DIO resources
Description Name
Indicates the functions of a device. For example, a function
H/W path 0/0/0/3/0/0/0 indicates function 0, which
is the last number of the H/W path. Therefore,
0/0/0/3/0/0/[0–N] are all functions of the same device
0/0/0/3/0/0. H/W Path
Indicates the LAN ID through which the host VM or vPar is
connected to the network. LAN Interface
Indicates the status (Up or Down) of the LAN interface. The
status is Up if the interface is operational, and Down if it
is not operational. Status
54 Using Integrity Virtual Server Manager views and tabs