HP ProLiant DL380 Server - Manual (Page 8)

Services
Select the services that you want enabled on the server. All of the selected services
are enabled for runlevels three and five, and
xinetd services are also enabled. The
settings for a specific runlevel can be changed after the operating system installation
is complete by using the
chkconfig tool. Refer to the chkconfig man page for more
details.
Linux ProLiant Support Packs
Linux ProLiant Support Packs (PSPs) are automatically installed with the operating
system. Certain configuration steps must be completed to ensure successful
installation of the PSPs and that HP Management Agents function properly.
1. Log in as
root . The HP ProLiant Linux Deployment Utility screen appears.
2. If you want to use HP Management Agents:
a. Select HP Server Management Drivers and Agents for Red Hat
Enterprise Linux.
b. Right-click to display the available actions, and select Configure
Components.
c. Enter the appropriate configuration data for your configuration, and then
click OK.
3. To use SNMP, ensure that the SNMP Protocol Tools are selected for installation
(default selection).
4. Click Install.
5. When prompted, select if you want to save the modified configuration
parameters.
6. Click OK when the installation completes.
7. Click Return to Main Menu, and review the summary of the installed
components.
8. Click Exit>Yes to exit the utility.
8 HP Factory-Installed Operating System Software for Red Hat Enterprise Linux ES 3 User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 216361-005.doc
Codename: CTO Software Part Number: 216361-005 Last Saved On: 3/10/04 9:04 AM