Web-based array configuration utility, Configuring additional nics, Installing additional options – HP ProLiant DL380 Server User Manual
Page 12

Web-Based Array Configuration Utility
To configure the array controllers using the Web-Based Array Configuration Utility:
1. Open Mozilla, and access
.
2. If you are prompted about unknown security certificates, click Continue or OK
to proceed.
3. Log in to the Management Agents as an administrator. The System Management
Homepage appears.
4. Refer to the HP Insight Management Agents User Guide and the README.TXT
file located at /opt/Compaq/cpqacuxe for instructions to complete the
configuration from the System Management Homepage.
Configuring Additional NICs
If your server has more than one NIC installed, complete the following steps to
configure the remaining NICs:
1. Log on to the server as
root
.
2. At the Red Hat Start menu, click System Settings>Network.
3. Select the NIC to configure, and click Edit.
4. Enter the appropriate network configuration information.
5. Click OK.
6. Repeat steps 3 through 5 to configure any remaining NICs.
7. Click File>Quit to exit the utility.
Installing Additional Options
You can install additional options after the operating system installation is complete
and the server is operational. Follow the instructions provided with the individual
software or hardware components you are installing.
12
HP Factory-Installed Operating System Software for Red Hat Enterprise Linux ES 3 User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 216361-005.doc
Codename: CTO Software Part Number: 216361-005 Last Saved On: 3/10/04 9:04 AM