HP ProLiant DL380 Server - Manual (Page 10)

Automatic Partitioning
The following partitions are automatically created on the server:
•
The /boot partition is 50 MB.
•
The swap partition is two times the total amount of RAM installed in the server.
•
The root partition is approximately 10 GB.
The remaining disk space is unpartitioned. For information about creating partitions,
refer to the Red Hat Enterprise Linux documentation included with your server.
Post-Installation Tasks
This section provides instructions for completing recommended tasks after the
software installation is complete.
Changing the Display Settings
To change the default video display settings:
1. Log on to the server as
root .
2. At the Red Hat Start menu, click System Settings>Display.
3. Use the dropdown menus to modify the Resolution and Color Depth
appropriately, and then click OK.
4. Test the various display settings to determine the appropriate settings for your
server.
10 HP Factory-Installed Operating System Software for Red Hat Enterprise Linux ES 3 User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 216361-005.doc
Codename: CTO Software Part Number: 216361-005 Last Saved On: 3/10/04 9:04 AM