Specifications and supplemental characteristics – Agilent Technologies 66001A User Manual
Page 11
General Information 11
When the power module is operated beyond either rated output, the performance specifications are not guaranteed, although
typical performance may be good. Operation in quadrant 2 is limited to about 10% of the maximum rated positive output
current. This allows the power module to sink current for more rapid downprogramming in the CV mode.
Specifications and Supplemental Characteristics
Table 1-1 lists the specifications of the power modules. Specifications are warranted over the specified temperature range.
Table 1-2 lists the supplemental characteristics, which are not warranted but are descriptions of performance determined
either by design or type testing.
Table 1-1. Performance Specifications
Agilent Model
Parameter
66101A
66102A
66103A
66104A
66105A
66106A
Specifications are warranted over the temperature range 0 to 55
°
C with a resistive load and the output connected for local
sensing. Derate the output current 1% per
°
C from 40
°
C to 55
°
C.
Output Ratings
Voltage:
0 - 8 V
0 - 20 V
0 - 35 V
0 - 60 V
0 - 120 V
0 - 200 V
Current:
0 - 16 A
0 - 7.5 A
0 - 4.5 A
0 - 2.5 A
0 - 1.25 A
0 - 0.75 A
Power:
128 W
150 W
157.5 W
150 W
150 W
150 W
Programming Accuracy @
calibration temperature ± 5
°
C)*
Voltage: 0.03% +
3 mV
8 mV
13 mV
27 mV
54 mV
90 mV
Current: 0.03% +
6 mA
3 mA
2 mA
1.2 mA
0.6 mA
0.4 mA
*Factory calibration temperature =
25
°
C
Ripple & Noise (from 20 Hz to 20
MHz with outputs ungrounded, or with
either output terminal grounded)
Constant Voltage:
rms
2 mV
3 mV
5 mV
9 mV
18 mV
30 mV
Constant Voltage: p-p
5 mV
7 mV
10 mV
15 mV
25 mV
50 mV
Constant Current: rms
8 mA
4 mA
2 mA
1 mA
1 mA
1 mA
Readback Accuracy
With respect to actual output @
calibration temperature following self
calibration.*
Voltage:
0.02% +
2 mV
5 mV
8 mV
16 mV
32 mV
54 mV
Current:
0.02% +
6 mA
3 mA
2 mA
1 mA
0.6 mA
0.3 mA
*Factory calibration temperature =
25
°
C
Load Regulation (change in output
voltage or current for any load change
within ratings)
Voltage:
1 mV
1 mV
1 mV
2 mV
4 mV
7 mV
Current:
0.5 mA
0.2 mA
0.2 mA
0.1 mA
50
µ
A
30
µ
A