Acer 365 Series - Manual (Page 65)

Operating on Battery Power Operating on Battery Power
2-16
computer to enter the power saving mode.
The following signals indicate that the computer is
in standby mode:
q The buzzer beeps
q The standby indicator flashes
!!
Warning: Unstored data is lost when you turn
off the computer power in standby mode or
when the battery is drained.
To leave standby mode and return to normal
mode:
q Press any key
q Move the active pointing device (internal or
external, PS/2 or serial)
q Open the display cover
q If the Resume Timer is set and matched, the
computer returns to normal mode
q If an incoming modem event occurs and the
Modem Ring Resume On Indicator is enabled,
the computer returns to normal mode
!!
Important: If the computer detects a PC I/O card
installed in the PC card slots, the computer will
not enter standby mode. Instead it will enter light
green mode. Light green mode is similar to
standby mode. It consumes very low power while