Axis Communications 25734 - Manual (Page 9)

- -
12. Now grab the camera assembly and connector the RJ45
cable and the input cable to the camera.
Open screw slots
Installing Axis 231D/232D Camera
(cont.)
13. Attach the
camera
assembly to
the housing by
sliding the (3)
open screw
slots over the
screws in the
housing. Slide
the bracket
forward, and
the tighten the
captive screw
on the bracket.
FOR REFERENCE ONLY
Captive screw
Cable Ties
11. To manage the input cable running from the connector
block to the camera use the (2) cable tie mounts and
cable ties that are located in the housing packet.
Cable Tie Mounts