Axis Communications 25734 - Manual (Page 4)

- -
2. In the kit there are (8) aluminum spacers - (4) 1" and
(4) ½". Thread (2) spacers - (1) 1" and (1) ½" - on
top of each of the (4) 2" spacers that are already
located on the base bracket inside the housing.
3. Then start (3) 8-32x3/8” phillips head screws onto the
3½ inch spacers inside the housing. Be sure to place
the screws so that they line up with the (3) open slots
on the quick release bracket.
½"
2"
1"
½" + 1" spacers
Installing the Axis 213 Camera
1. Install the camera onto the quick release bracket using
(2) 10-32 x 3/8” screws and star washers provided in the
packet.
Attach cameras using these (2) holes