LG 60PH6700 - Manual (Page 41)

SPECIFICATIONS
ENG
ENGLISH
41
MAINTENANCE
y y For models supporting Miracast™ / WiDi, you can set the 3D mode.
3D supported mode manually
Input Signal Playable 3D video format
TV -
2D to 3D, S/S, T/B ATV (CVBS) -
Component -
HDMI-PC
1080p
2D to 3D, S/S, T/B, C/B, R/I, C/I
(60Hz : F/S)
Others 2D to 3D, S/S, T/B
HDMI-DTV
Interlace 2D to 3D, S/S, T/B
Progressive
2D to 3D, S/S, T/B, C/B, R/I, C/I
(60Hz : F/S )
USB / DLNA
(Movie)
704 x 480p (Over)
2D to 3D, S/S, T/B, C/B, R/I, C/I
(60Hz : F/S )
704 x 480i (Over) 2D to 3D, S/S, T/B
704 x 480 (Under) 2D to 3D
USB / DLNA
(Photo)
320 x 240 (Over) 2D to 3D, S/S, T/B
320 x 240 (Under) 2D to 3D
Miracast™ /
WiDi
1024 x 768p
2D to 3D, S/S, T/B 1280 x 720p
1920 x 1080p
Others 2D to 3D
S/S : Side by Side , T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative,
L/A : Line Alternative, S/S Full :Side by Side Full, C/B : Checker Board,
R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential
For 60PH6700
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
y y Before Cleaning, turn the power off and disconnect the power cord and all other cables.
y y When the TV is left unattended or unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
CAUTION
Screen, Frame, Cabinet and Stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
y y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
y y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.
y y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
CAUTION
Power Cord
Remove the accumulated dust or dirt on the power cord regularly.