LG 60PH6700 - Manual (Page 13)

ASSEMBLING AND PREPARING
ENG
ENGLISH
13
ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AG-S3**
3D Glasses AN-MR400
Magic Remote LG Audio Device AN-WF100
Wi-Fi Dongle
AN-VC4**
Video Call Camera AN-TP300
Touch Pen, Cradle AN-TD200
Touch Pen Dongle AN-BL***
Wireless IR Blaster
(Depending on
model)
With the Touch Pen, you can use the TV as a touch
monitor with or without connecting it to your PC.
You need to purchase the Touch Pen (including the
cradle) together with the dongle.
Compatibility PH4700 PH6700
AG-S3** 3D Glasses
• •
AN-MR400 Magic Remote
• •
LG Audio Device
• •
AN-WF100 Wi-Fi Dongle
•
AN-VC4** Video Call Camera
• •
AN-TP300 Touch Pen, Cradle
AN-TD200 Touch Pen Dongle • •
AN-BL*** Wireless IR Blaster
•
NOTE
y y How to use the ferrite core
- If there are three ferrite cores, follow as shown in Figures 1-1, Figure 2, Figure 3
- If there are four ferrite cores, follow as shown in Figures 1-2, Figure 2, Figure 3
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once.
(Black)
[Cross Section of
Ferrite Core]
(Black)
[Cross Section of
Ferrite Core]
[Cross Section of
Ferrite Core]
[Figure 1-1]
[to the TV] [to a wall plug]
Place the ferrite core close to a wall plug.
[Figure 1-2]
[to the TV] [to a wall plug]
Place the ferrite core close to the TV and a wall plug.
[Figure 2]
[to the TV]
[to an External device]
10 mm(+ / - 5 mm)
[Figure 3]
[to the TV]
[to an External device]
10 mm(+ / - 5 mm)
2 Use the ferrite core to reduce the electromagnetic interference in the LAN cable.
Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
3 Use the ferrite core to reduce the electromagnetic interference in the cable.
Wind the component cable on the ferrite core once. Place the ferrite core close to the TV.
(Depending on model)