Airlink101 Airlik 101 N300 - Manual (Page 51)

50
Here are descriptions of every buttons:
Backup Settings Press ‘Save’ button, and you’ll be prompted to download the
configuration as a file; default filename is ‘config.bin’, you can save it
as another filename for different versions, and keep it on your local
hard drive.
Restore Settings Press ‘Browse’ to pick a previously-saved configuration file from your
computer, and then click ‘Upload’ to transfer the configuration file to
access point. After the configuration is uploaded, the access point’s
configuration will be replaced by the file you just uploaded.
Restore to Factory
Default Press ‘Reset’ button to remove all settings you made, and restore the
access point back to factory default settings.