Airlink101 Airlik 101 N300 - Manual (Page 43)

42
2.7 Configure Advanced Settings
This wireless access point has many advanced wireless features. Please note that all settings
listed here are for experienced users only, if you’re not sure about the meaning and function of
these settings, please don’t modify them, or the wireless performance might be reduced.
You can click ‘Advanced Settings’ on the left menu to enter advanced settings menu, and the
following page will be displayed:
Here are descriptions of every setup item:
Fragment Threshold Set the Fragment threshold of wireless radio. Do not modify default
value if you don’t know what it is, default value is 2346.
RTS Threshold Set the RTS threshold of wireless radio. Do not modify default value if
you don’t know what it is, default value is 2347.
Beacon Interval Set the beacon interval of wireless radio. Do not modify default value if
you don’t know what it is, default value is 100.
DTIM Period Set the DTIM period of wireless radio. Do not modify default value if
you don’t know what it is, default value is 3.
Data Rate Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically, it’s not necessary to change this value
unless you know what will happen after modification.