Airlink101 Airlik 101 N300 - Manual (Page 29)

28
Here are descriptions of every setup item:
Band Please select the wireless band you wish to use. By selecting
different band setting, you’ll be able to allow or deny the wireless
client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless
clients using the wireless band you select (802.11b, 802.11 Draft-N,
or 802.11g) will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using 802.11b
and 802.11g band will be able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to
connect to this access point, select 2.4GHz (B+G+N).
Channel
Number Please select a channel number you wish to use. The channel
number must be same with another wireless access point you wish to
connect.
MAC address 1~4 Please input the MAC address of the wireless access point you wish
to connect.
Set Security Click this button to select an encryption mode for this wireless link, a
new popup window will appear. Please refer to Section 2-7 for
detailed descriptions.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
After you clicked Apply, the following message will be displayed on your web browser: