Airlink101 Airlik 101 N300 - Manual (Page 41)

40
2.6 Set Up MAC Filtering
Another security measure you can use to keep hackers and intruders away is ‘MAC filtering’.
You can pre-define a so-called ‘white-list’, which contains MAC addresses of the wireless clients
you trust. All other wireless client with the MAC address which is not in your list will be denied
by this wireless access point.
To set up MAC filtering, please click ‘MAC Filtering’ on the left menu and the following page will
be displayed:
This page contains two parts of MAC filtering information. All allowed MAC addresses will be
listed in upper part (1), and you can add new MAC addresses by components in lower part (2).
Here are descriptions of every setup item:
Select Check this box to select one or more MAC address(es) to delete.
Delete Selected Click this button to delete all selected MAC address(es).
Delete All Delete all MAC address entries.
Reset Uncheck all selected MAC address entries.
Enable Wireless
Access Control Check this box to enable MAC address restriction, if unchecked, no
restriction will be enforced (any wireless client with proper encryption
setting will be able to connect to this wireless access point).
Address
Filtering
Table (1)
Add
New Entry
Here (2)