Airlink101 Airlik 101 N300 User Manual

Page 39

Here are descriptions of every setup item:

WPA Unicast Cipher
Suite

You can select WPA encryption type here. AES is safer than TKIP,
but not every wireless client supports it. Please refer to the
specification of your wireless client to decide which encryption type
you should use.

Use internal
MD5/PEAP RADIUS
Server

Uses built-in RADIUS Server (refer to Section 2-8) instead of external
RADIUS server. If you check this box, the value in following three
fields will be ignored.

RADIUS Server IP
address

Please input the IP address of RADIUS authentication server here.

RADIUS Server Port

Please input the port number of RADIUS authentication server here.
Default value is 1812.

RADIUS Server
Password

Please input the password of RADIUS authentication server here.

2.5.4 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user authentication server) by
checking ‘Enable 802.1x Authentication’ box when you select ‘Disable’ or ‘WEP’ as encryption
type, and the following page will be displayed: