beautypg.com

Cloning procedures (cont.) – LG 26LD340H User Manual

Page 189

background image

25

206-4177

Cloning Procedures (Cont.)

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. If an analog channel is not available, direct tune the TV to an Aux source,

or select an Aux source, such as AV-1, from the Input Menu. Then, plug one

end of the MPI cable into the TV MPI port.

3. Turn ON the TLL-1100A.
4. Use the MODE button on the TLL-1100A to select Clone Mode.
5. Use the Left/Right arrows on the TLL-1100A to select the Memory CBank

(1 to 8) in which to store the Master TV Setup.

6. Plug the other end of the MPI cable into the MPI port on the bottom of the

TLL-1100A. The Clone Selection Menu will display on the TV screen.

7. Press 1 on the Installer Remote to select LEARN FROM TV from the Clone

Selection Menu. Then, press ENTER to transfer the Master TV Setup into

CBankX on the TLL-1100A.

Learning usually takes about 90 seconds. “LEARNING IN PROGRESS” will

be displayed on the screen while the TLL-1100A copies the Master Setup.

When the Learning process is complete, a “LEARNING COMPLETE” mes-

sage will be displayed.

Cloning is accomplished using the TV/

clone programmer MPI ports for com-

munication (see figure).

TLL-1100A Cloning Notes
• Read the IMPORTANT CLONING

INFORMATION on page 23 before

beginning any cloning procedures.

• Ensure the TLL-1100A is either fully

charged or connected to AC power.

• Learning and Teaching is only

possible between identical model

TVs; however, the TLL-1100A clone

programmer can store up to eight

different Master TV Setups.

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-

-

To change menu items, press

channel keys or digits.

To execute item, press Enter.

Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target
TVs, as this will damage the clone programmer and the PPV card.

Antenna

or CATV

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

TV Link

Loader

TLL1100A
Ready

TLL-1100A

ENTER

RECEIVE

SEND

MENU

MODE

CHARGE

MPI
Cable

TLL-1100A Clone

Programmer

This manual is related to the following products: