Installer menu (cont.) – LG 26LD340H User Manual
Page 133
16
206-4163
Installer Menu Items 073 through 119
Menu
Item
Function
Value Range
Default Value
Brief Description of Function and Comments
073
CH NOT AVBLE
0 / 1
0
If set to 1 and Channel Override is 0, “NOT AVAILABLE” message is displayed
when directly accessing a channel not in the favorite Channel List.
075
REVERT CH
0 / 1
0
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
078
UPN MSB
0 ~ 255
0
User programmable number, most significant byte.
079
UPN MSB-1
0 ~ 255
0
User programmable number, most significant byte - 1.
080
UPN MSB-2
0 ~ 255
0
User programmable number, most significant byte - 2.
081
UPN LSB
0 ~ 255
0
User programmable number, least significant byte.
082
CHKSM ERROR
0 / 1
1
Enforces rigid MPI checksum.
083
HANDSHK TIME
0 ~ 5
5
Relaxes MPI timing to be compatible with PC-based Windows-
controlled systems.
084
PERMANENT BLK
0 / 1
0
Removes block hours setting for Parental Control and makes block permanent.
087
REAR RGB EN.
0
/
1
/
17
1
Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB1.
Set to 1 to enable for RGB PC. Set to 17 for Auto Configure.
088
EN NOISE MUTE
0 / 1
1
If set to 1, audio is muted if no signal is present.
090
KEY LOCK
0 / 1
0
If set to 1, keyboard is locked out, IR is still functional.
091
YPrPb2 EN
0 / 1
1
Set to 1 to enable HDMI 2 input.
093
RJP AVAILABLE
0, 1, 2, 5, 6
0
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See
detailed descriptions.)
094
SAP MENU EN
0 / 1
1
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on
Function Menu.
096
DEF. ASP. RATIO
0 ~ 4
2
Sets default aspect ratio at power up. See detailed descriptions and item 106.
098
PRO:CENTRIC
0 ~ 2
0
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode.
099
BACK LIGHTING
1 ~ 100,
101 ~ 200, 255
100
Sets the level of the TV picture back lighting. (See detailed descriptions.)
102
ATSC BAND
0 ~ 4
4
Selects ATSC band.
103
ATSC TUNE MODE
0 / 1
1
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
104
START MINOR CH
0 ~ 255
0
Selects Minor Start Channel. Set to 0 for NTSC.
106
ASP RATIO LOCK
0 / 1
0
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
power cycle.
116
VIDEO MUTE EN
0 / 1
0
Set to 0 for Normal. Set to 1 for Blank.
117
FACT DEFAULT
0 / 1
0
Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings.
118
POWER SAVINGS
1 / 3 / 7
3
If set to 1, the b-LAN module is always powered. If set to 3, the b-LAN module
is only powered when TV is turned ON. If set to 7, the b-LAN module is never
powered.
119
DATA CHANNEL
0 ~ 135
0
Set to 0 to disable. Set to the RF channel number of the Data Channel for
Pro:Centric or E-Z Installation data. (See detailed descriptions.)
Installer Menu (Cont.)