Aviom A-16CS - Manual (Page 59)

49
Save
Recall
1 2
Group Solo Mute
Select
Mute
In Recall Mode
All Volumes
Zero
3 4 5 6 7 8 9 10 11 12 13 14 15 16
Pan and Volume Controls
To make changes to a Channel from an A-16CS:
• Select a Channel by pressing its numbered button—the
upper LED will light.
• Rotate the V
OLUME
knob to the right to increase the
volume, to the left to lower the volume
• While the Channel is still selected, you can also change
the Pan setting. Rotate the P
AN
knob left or right to
change the position of the Channel in the stereo field.
Muting a Channel
While creating a mix, any Channel or combination of Channels can be
muted. Likewise any Groups that have been created can also be muted.
Unlike the Solo Mode, the changes you make with the M
UTE
button
can be saved as part of a Preset.
To mute a Channel from an A-16CS:
• Select a Channel (or Group)
• Press the
M
UTE
button
• The yellow LED in the Channel button lights on both
the A-16CS and A-16R
To unmute a Channel or Group:
• Select a muted Channel
• Press the
M
UTE
button
• The yellow LED in the Channel button will go out
Additional Channels can be muted or unmuted by following the same
procedure—first select the Channel, then press the M
UTE
button.