Asus K7V-RM - Manual (Page 19)

ASUS K7V-RM User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
4) Onboard Audio Setting (available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an PCI audio card on any
of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in
this section). If using an PCI audio expansion card, Onboard AC’97 Audio Con-
troller in 4.4.5 Peripheral Setup must also be disabled.
Setting AUDIO CODEC
Enable [1-2] [1-2] [1-2] [1-2] (default)
Disable [2-3] [2-3] [2-3] [2-3]
01 01 01
K7V-RM
®
K7V-RM Audio Codec Setting
Enable
Onboard
Audio Codec
(Default)
1
2
3
1
2
3
SPK
ADN#
AUD_EN2 AUD_EN1
SPK AUD_EN2
Disable
Onboard
Audio Codec
ADN# AUD_EN1
3) 3.3V Power Source Setting (JP3–JP10) (Requires optional components.)
This jumper lets you select the onboard 3.3V from the motherboard if your ATX
power supply does not have a 3.3V lead and 3.3V optional components are
mounted on the motherboard. This motherboard normally does not have the
3.3V components and therefore requires a standard ATX power supply with its
own 3.3V lead.
Setting JP3–JP10
3.3V from PWR [1-2] (default)
3.3V from MB [0-0]
01 01 01
K7V-RM
®
K7V-RM 3.3V Power Source Setting
JP3–JP10
3.3V
from Power Supply
(Default)
3.3V
from Motherboard
JP3001
JP3008