Asus P8Z77 WS - Manual (Page 79)

ASUS P8Z77 WS 3-9
Chapter 3
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
The item X.M.P. appears only when you set the Ai Overclocking Tuner to [Manual].
Turbo Ratio [Auto]
Allows you to set the CPU ratio automatically or manually.
[Auto] Sets all Turbo Ratio to Intel ® CPU default settings automatically.
[Manual] Sets the Turbo Ratio for every core-activation condition of a full
unlocked CPU manually.
When the Turbo Ratio is set to [Manual], the following item appears:
Ratio Synchronizing Control [Disable]
[Enabled] Allows you to set an individual Turbo Ratio for every core-activation condition
[Disabled] Allows you to set one single Turbo Ratio for all core-activation conditions.
1-Core Ratio Limit [Auto]
Allows you to set the 1-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[35~63] Select to to manually assign a 1-Core Ration Limit value that is
higher than or equal to the 2-Core Ratio Limit.
2-Core Ratio Limit [Auto]
Allows you to set the 2-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[35~63] Select to to manually assign a 2-Core Ratio Limit value that is
higher than or equal to the 3-Core Ratio Limit. 1-Core Limit must
not be set to [Auto]
3-Core Ratio Limit [Auto]
Allows you to set the 3-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[35~63] Select to to manually assign a 3-Core Ratio Limit value that is
higher than or equal to the 4-Core Ratio Limit. 1-Core/2-Core
Ratio Limit must not be set to [Auto]
4-Core Ratio Limit [Auto]
Allows you to set the 4 Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[35~63] Select to to manually assign a 4-Core Ratio Limit value that is
higher than or equal to the 3-Core Ratio Limit. 1-Core/2-Core/
3-Core Limit must not be set to [Auto]