Asus P8Z77 WS - Manual (Page 116)

3-46 Chapter 3: BIOS setup
Chapter 3
4. Select Yes and press . When BIOS update is done, press to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Updating the BIOS file
To update the BIOS file using BIOS Updater
1. At the FreeDOS prompt, type bupdater /i and press .
ASUSTek BIOS Updater for DOS V1.30 [2012/12/22]
Current ROM Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
P8Z77ID.CAP 2097152 2011-12-21 17:30:48
PATH: A:\
BOARD: P8Z77 WS
VER: 0205
DATE: 12/21/2011
BOARD: Unknown
VER: Unknown
DATE: Unknown
D:\>bupdater /i
2. The BIOS Updater screen appears as below.
3. Press to switch between screen fields and use the keys
to select the BIOS file and press . BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes No
FLASH TYPE: MX1C 25L1065A