Asus P8Z77 WS - Manual (Page 168)

5-6 Chapter 5: Multiple GPU technology support
Chapter 5
5.2.4 Installing four SLI-ready graphics cards
1. Prepare four SLI-ready graphics cards.
2.
Insert the four graphics card into the PCIEX16 slots. If your motherboard has more
than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and firmly insert the 4-Way SLI bridge connector to the goldfingers on each
graphics card. Ensure that the connector is firmly in place.
5. Connect four independent auxiliary power sources from the power supply to the four
graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
4-Way SLI bridge