Bosch NET8666SUC - Manual (Page 13)

13
Once the time has elapsed
At the end of the programmed time, a beep will sound
and ‹‹ will appear on the timer display. The V indicator
is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and
V indicators light up.
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and
V indicators light up.
Touch the 0 key until ‹‹ appears on the timer display.
The V indicator goes out.
Automatic Shutoff
The appliance features an automatic shutoff function.
Automatic shutoff is activated when the settings have not
been changed over an extended period of time. The time
when automatic shutoff is activated is based on the
temperature selected.
Shutoff Activated
”‰ appears in the display. Operation is interrupted.
Touch any key to make the display indicator disappear.
You can now adjust the settings.
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock for 4 seconds. The
D
indicator lights up for 4 seconds. The cooktop is now
locked.
Turning the child lock off
Touch Clean Lock/Child Lock for 4 seconds. The safety
panel lock is now canceled.
9 CAUTION
The child lock may be accidentally turned on and off
due to:
▯
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the Clean Lock/Child
Lock touch key.
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The > indicator
appears. The control panel is locked for approximately
35 seconds. You can now clean the surface of the
control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
You can turn off the cooktop at any time.
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚ Automatic child lock
‹ Off*
‚ On
™ƒ Sound signals
‹ Confirmation beep and error signal off
‚ Only error signal on
ƒ All signals on*
™† Automatic timer
‹ Off*
‚ - ŠŠ Automatic shut-off time
™‡ Duration of timer end signal
‚ 10 seconds*
ƒ 30 seconds
„ 1 minute
*factory settings