Lighting the burner during a power failure, Setting the flame size, Turning the burner off – Bosch HDS7052U User Manual
Page 26
Operation - Cooktop
English 22
Lighting the Burner during a Power
Failure
Cooktop burners can be lit manually during a power failure. Hold a match at the
port and turn the knob to the HI position. Wait until the flame is burning all the
way around the burner before adjusting the flame to the desired setting.
Setting the Flame Size
After lighting, turn the knob counterclockwise to the desired flame size. See
“Cooking Guide” on page 30 for recommended burner settings.
CAUTION:
To prevent possible burns, the flame should not extend beyond the
edge of the cookware. This instruction is based on safety consider-
ations. Damage to the cookware or the appliance may also result.
Turning the Burner off
Turn knob clockwise to the OFF position.
Note:
A “pop” may be heard when the burner is turned off. The “pop” may
be louder with LP gas than with natural gas. This is normal.