Electrolux EQT4520BOG - Manual (Page 33)

8. INSTALLATION INSTRUCTIONS
WARNING!
Refer to "Safety information"
chapter.
Before the installation
Before the installation of the appliance, re-
cord the information below from the rating
plate. The rating plate is on the bottom of
the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
8.1 Built-in appliances
• Only use the built-in appliances after
you assemble the appliance into correct
built-in units and work surfaces that
align to the standards.
8.2 Connection cable
• The appliance is supplied with the con-
nection cable.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
90°C; or higher). Speak to your local
Service Centre.
230V~
230V~
N
PE
L
If, you use the accessory frame C-
FRAME, first read the instruction supplied
with the frame before you install the appli-
ance.
8.3 Assembly
min.
50mm
min.
500mm
340 +1 mm
490 +1 mm
R 5mm
55mm
ENGLISH 33