Electrolux EN2401AOX - Manual (Page 70)

70 www.electrolux.com
14. Replace the lower hinge part to the
left side and fixing it with the special
flange self-tapping screws. Replace
the front feet fixed board to another
side and fixing it with the special
flange self-tapping screws. Install
the ajustable bottom feet parts.
15. Transfer the lower door to the property
position, adjust the lower hinge part,
make the hinge axis into the lower hole
of the lower door, then tight the bolts.
16. Upturn the middle hinge part the
direction 180 degree, transfer it and
adjust its position. Make the middle
hinge axis into the upper hole of the
lower door, tight the bolts.
17. Transfer the upper door to the
appropriate position. Secure the door’s
level; make the middle hinge axis into
the lower hole of the upper door.
18. Transfer the upper hinge part and
make the upper hinge axis into the
upper hole of the upper door, and
adjust the position of the upper
door(please support the upper door
with your hand when doing it),fixing
the upper hinge part with the special
flange self-tapping screws.
19. Install the screw hole cover on the top
right corner of the refrigerator. Install
the upper hinge cover (which is in the
plastic bag) on the left corner and
screw it. Put the other upper hinge
cover into the plastic bag.