Agilent Technologies 34970A - Manual (Page 9)

Frequency and Period Configuration Commands
(see page 214 in the User’s Guide)
CONFigure
:FREQuency [{<
range >| AUTO |MIN|MAX|DEF}
[,< resolution >|MIN|MAX|DEF}],] ( @ < scan_list >)
CONFigure? [( @ < ch_list >)]
[SENSe:]
FREQuency:VOLTage:RANGe {<
range >|MIN|MAX}[,( @ < ch_list >)]
FREQuency:VOLTage:RANGe? [{( @ < ch_ list >)|MIN|MAX}]
FREQuency:VOLTage:RANGe:AUTO {OFF| ON }[,( @ < ch_list >)]
FREQuency:VOLTage:RANGe:AUTO? [( @ < ch_list >)]
[SENSe:]
FREQuency:APERture {0.01|
0.1 |1|MIN|MAX}[,( @ < ch_list >)]
FREQuency:APERture? [{( @ < ch_list >)|MIN|MAX}]
[SENSe:]
FREQuency:RANGe:LOWer {3|
20 |200|MIN|MAX}[,( @ < ch_list >)]
FREQuency:RANGe:LOWer? [{( @ < ch_list >)|MIN|MAX}]
CONFigure
:PERiod [{<
range >| AUTO |MIN|MAX|DEF}
[,< resolution >|MIN|MAX|DEF}],] ( @ < scan_list >)
CONFigure? [( @ < ch_list >)]
[SENSe:]
PERiod:VOLTage:RANGe {<
range >|MIN|MAX}[,( @ < ch_list >)]
PERiod:VOLTage:RANGe? [{( @ < ch_ list >)|MIN|MAX}]
PERiod:VOLTage:RANGe:AUTO {OFF| ON }[,( @ < ch_list >)]
PERiod:VOLTage:RANGe:AUTO? [( @ < ch_list >)]
[SENSe:]
PERiod:APERture {0.01|
0.1 |1|MIN|MAX}[,( @ < ch_list >)]
PERiod:APERture? [{( @ < ch_list >)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
9