Agilent Technologies 34970A - Manual (Page 3)

Scan Configuration Commands
(see page 226 in the User’s Guide)
ROUTe
:SCAN ( @ < scan_list >)
:SCAN?
:SCAN:SIZE?
TRIGger
:SOURce {BUS|
IMMediate |EXTernal|ALARm1|ALARm2|ALARm3|ALARm4|TIMer}
:SOURce?
TRIGger
:TIMer {<
seconds >| MIN |MAX}
:TIMer?
TRIGger
:COUNt {<
count >| MIN |MAX|INFinity}
:COUNt?
ROUTe
:CHANnel:DELay <
seconds >[,( @ < ch_ list >)]
:CHANnel:DELay? [( @ < ch_list >)]
:CHANnel:DELay:AUTO {OFF|ON}[,( @ < ch_list >)]
:CHANnel:DELay:AUTO? [( @ < ch_list >)]
FORMat
:READing:ALARm {
OFF |ON}
:READing:ALARm?
:READing:CHANnel {
OFF |ON}
:READing:CHANnel?
:READing:TIME {
OFF |ON}
:READing:TIME?
:READing:UNIT {
OFF |ON}
:READing:UNIT?
FORMat
:READing:TIME:TYPE {ABSolute|
RELative }
:READing:TIME:TYPE?
ABORt
INITiate
READ?
Scan Memory Commands
(see page 235 in the User’s Guide)
DATA:POINts?
DATA:REMove? < num_rdgs >
SYSTem:TIME:SCAN?
FETCh?
R? [< max_count >]
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
3