Agilent Technologies 34970A - Manual (Page 4)

Scanning With an External Instrument
(see page 239 in the User’s Guide)
ROUTe
:SCAN ( @ < scan_list >)
:SCAN?
:SCAN:SIZE?
TRIGger
:SOURce {BUS|IMMediate|EXTernal|
TIMer }
:SOURce?
TRIGger
:TIMer {<
seconds >| MIN |MAX}
:TIMer?
TRIGger
:COUNt {<
count >|MIN|MAX| INFinity }
:COUNt?
ROUTe
:CHANnel:DELay <
seconds >[,( @ < ch_ list >)]
:CHANnel:DELay? [( @ < ch_list >)]
ROUTe
:CHANnel:ADVance:SOURce {
EXTernal |BUS|IMMediate}
:CHANnel:ADVance:SOURce?
ROUTe
:CHANnel:FWIRe {OFF|ON}[,(
@ < ch_list >)]
:CHANnel:FWIRe? [( @ < ch_list >)]
INSTrument
:DMM {OFF|ON}
:DMM?
:DMM:INSTalled?
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
4