Agilent Technologies 34970A - Manual (Page 8)

Current Configuration Commands
(see page 224 in the User’s Guide)
Valid only on channels 21 and 22 on the 34901A multiplexer module.
CONFigure
:CURRent:DC [{<
range >| AUTO |MIN|MAX|DEF}
[,< resolution >|MIN|MAX|DEF}],] ( @ < scan_list >)
CONFigure? [( @ < ch_list >)]
[SENSe:]
CURRent:DC:RANGe {<
range >|MIN|MAX}[,( @ < ch_list >)]
CURRent:DC:RANGe? [{( @ < ch_list >)|MIN|MAX}]
CURRent:DC:RANGe:AUTO {OFF| ON }[,( @ < ch_list >)]
CURRent:DC:RANGe:AUTO? [( @ < ch_list >)]
[SENSe:]
CURRent:DC:RESolution {<
resolution >|MIN|MAX}[,( @ < ch_list >)]
CURRent:DC:RESolution? [{( @ < ch_list >)|MIN|MAX}]
[SENSe:]
CURRent:DC:APERture {<
time >|MIN|MAX}[,( @ < ch_list >)]
CURRent:DC:APERture? [{( @ < ch_list >)|MIN|MAX}]
[SENSe:]
CURRent:DC:NPLC {0.02|0.2|
1 |2|10|20|100|200|MIN|MAX}[,( @ < ch_list >)]
CURRent:DC:NPLC? [{( @ < ch_list >)|MIN|MAX}]
CONFigure
:CURRent:AC [{<
range >| AUTO |MIN|MAX|DEF}
[,< resolution >|MIN|MAX|DEF}],] ( @ < scan_list >)
CONFigure? [( @ < ch_list >)]
[SENSe:]
CURRent:AC:RANGe {<
range >|MIN|MAX}[,( @ < ch_list >)]
CURRent:AC:RANGe? [{( @ < ch_list >)|MIN|MAX}]
CURRent:AC:RANGe:AUTO {OFF| ON }[,( @ < ch_list >)]
CURRent:AC:RANGe:AUTO? [( @ < ch_list >)]
[SENSe:]
CURRent:AC:BANDwidth {3|
20 |200|MIN|MAX}[,( @ < ch_list >)]
CURRent:AC:BANDwidth? [{( @ < ch_list >)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
8