Electrolux EOZ3430DAX - Manual (Page 9)

Oven function Application
Pyrolysis
To clean the oven. The high temperature burns off the
residual dirt. You can then remove it with a cloth when
the appliance is cold.
5.3 Display
1
Timer
2
Heat-up and residual heat indicator
3
Water tank (selected models only)
4
Core temperature sensor (selected
models only)
5
Door lock (selected models only)
6
Hours / minutes
7
Clock functions
1 7 2 3
4 5 6 7
5.4 Buttons
Button Function Description
Clock To set a clock function.
, Minus, plus To set the time.
5.5 Heat-up and residual heat
indicator
When you activate an oven function, the
bars in the display
come on one by
one. The bars show that the oven temper-
ature increases or decreases.
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more
than 40 °C. Turn the temperature knob
left or right to show the oven temperature
on the display.
6. CLOCK FUNCTIONS
Sym-
bol
Function Description
Minute Minder To set a countdown time.
Time of day To set, change or check the time of day. Refer to "Set-
ting the time of day".
Duration To set how long the appliance must operate. First set an
oven function before you set this function.
End To set when the appliance must be deactivated. First set
an oven function before you set this function. You can
use Duration and End at the same time (Time Delay) to
set the time when the appliance must be activated and
then deactivated.
ENGLISH 9