Canon Wireless Transmitter WFT-E5A - Manual (Page 17)

17
When the AC Adapter Kit ACK-E6 (sold separately) is used, a household power outlet can be
used to power the camera without worrying about the battery level.
1 Connect the DC coupler plug.
Connect the DC coupler plug to the socket of the
AC adapter.
2 Connect the power cord.
Connect the power cord as shown.
Insert the plug into the outlet.
After usage, unplug from the outlet.
3 Insert the DC coupler.
Open the cover, and insert the DC coupler firmly
until the lock position.
4 Close the cover.
Pass the cord through the groove while opening
the cap of the DC coupler cord notch, and then
close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s power switch is set to <ON>.
COP
Y