beautypg.com

Canon PowerShot SX170 IS User Manual

Page 10

background image

10

1
2
3
4
5
6
7
8
9

Cover

Before Use

Common Camera
Operations

Advanced Guide

Camera Basics

Auto Mode

Other Shooting
Modes

P Mode

Playback Mode

Setting Menu

Accessories

Appendix

Index

Basic Guide

Tv, Av, and M
Mode

Caution

Denotes the possibility of damage to the equipment.

Do not aim the camera at bright light sources (such as the sun on a
clear day).

Doing so may damage the image sensor.

When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.

On cameras that raise and lower the flash automatically, do not push

the flash down or pry it open.

This may cause the product to malfunction.

In regular use, small amounts of smoke may be emitted from the

flash.

This is due to the high intensity of the flash burning dust and foreign
materials stuck to the front of the unit. Please use a cotton swab to remove

dirt, dust or other foreign matter from the flash to prevent heat build-up and
damage to the unit.

Remove and store the battery pack/batteries when you are not using
the camera.

If the battery pack or batteries are left inside the camera, damage caused
by leakage may occur.

Before you discard the battery pack/batteries, cover the terminals
with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

If your camera is used with a battery charger, keep the charger
unplugged when not in use. When charging the battery pack, do not
leave it covered with a cloth or put other objects on it.

Leaving the unit plugged in for a long period of time may cause it to

overheat and distort, resulting in fire.

Do not leave the battery pack near pets.

Pets biting the battery pack could cause leakage, overheating or explosion,

resulting in fire or damage.

If your camera uses multiple batteries, do not use batteries that have
different levels of charge together, do not use old and new batteries
together, and do not insert the batteries with the + and – terminals
reversed.

This may cause the product to malfunction.

Do not sit down with the camera in your pocket.

Doing so may cause malfunctions or damage the screen.

When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen. Also close the screen (so that
it faces the camera body), if your camera has a screen that closes.

Do not attach any hard objects to the camera.

Doing so may cause malfunctions or damage the screen.