Canon Wireless File Transmitter WFT-E2 II A - Manual (Page 81)

81
Responding to Error Messages
8
T
ro
ubleshooting
This error occurs if, for some reason, the transmitter fails to receive confirmation
from the FTP server that image file transfer is complete.
X Restart the FTP server and camera and send the images again.
Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN device?
X Move the antenna to a position clearly visible from the point of view of the transmitter.
(p.85)
What to check on the transmitter
On the transmitter, does the SSID setting match that of the wireless LAN device?
X Check the SSID on the wireless LAN device, and configure the same SSID on the
transmitter. (p.16)
What to check on the wireless LAN device
Is the wireless LAN device on?
X Turn on the wireless LAN device.
When you are using WFT-E2 IID with wireless LAN devices supporting IEEE
802.11a, are the device settings locked on IEEE 802.11a?
X Configure the wireless LAN device to allow access via IEEE 802.11b and g.
If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?
X Register the transmitter’s MAC address (p.50) on the wireless LAN device.
47: Image file transfer completion not confirmed by FTP server
61: Same SSID wireless LAN terminal not found
COP
Y